JM Equipment - Goodstrong Sheeter (Single rotary)

Goodstrong Sheeter (Single rotary)

FEATURES :
	Two motor drives synchronous cutting
	Heavy Duty cutting section with auto sheet length and squareness
	2 positions Shaftless Unwind Stand
	Auto Tension Control
	Auto Edge Guidance
	Decurler Device
	3 Station Slitting
	Trim Removal System
	Dust Extraction
	Overlapping Tape Section
	Layboy to accept pile height of 1200㎜
	Counter and Tab Inserters

SHAFTLESS UNWIND STAND：
	Each shaftless unwind stand has its own control station,
	thus allowing positioning laterally, and vertically for loading and unloading the reels.
	The dancer roller is designed with Auto Tension Control for measuring the tension.
	Auto Edge Guidance is supplied as standard, allowing minimum edge trim for web width and is controlled
	throughout the reels from start to completion.
	Decurler devices complete with one square bar and one round bar, alternative to the paper or board and could be
	adjusted through the hand wheel.

TWIN HELICAL KNIVES
	The specially designed Twin Rotary Knives are driven by the AC Servo motor, provides excellent sheet to
	sheet accuracy +/- 0.5mm, and high performance synchronized control system gives less force, more durable
	and guarantees longer knife life.
	Synchronous cutting by Twin Helical Knives ensures squareness, clean cut and dust free edges, can work
	efficiently with the Printers, and simplifies the processing procedure.
	The squareness is controlled automatically.

Men/Machine Interface
	Length of cut value is entered by a touch screen interface for quick and easy size changing.
	Length of cut, quantity, machine speed, cut speed are displayed on the screen.

Tab Inserter Setting
	Counter and Tab Inserters supplied that will automatically insert tabs at the required ream count.

Delivery
	Layboy to accept pile height of 1200mm including pallet.
	There are side-joggers on both left and right sides of the stand and a front jogger, controlled by a vibration
	motor to collect the paper evenly and trimly.
	Safety devices on three sides of the lifting table, whenever there's impurity entering into the bottom of the lifting
	table during the operation, the lifting table will stop running immediately.

Overlapping Station
	Check Roller Positioning at the overlapping station is via a manually operated hand wheel, which the operator can
	set to suit the sheet length being cut.
	A scale is included to position the Check Roller Assembly.

ADVANCED DESIGN CONCEPT

GMC-TC

GMC-TC

A servo motor driving provides high accuracy, high performance synchronous control system . ( + / -0.5 mm ) - ( 300M / Min )
Synchronous cutting of both rotary knife ensures clean cut and long knife life.
Length of cut value is numerically entered for quick and easy size changing.
Length of cut, quantity, machine speed, cut speed are displayed on the screen.



Dual Position Shaftless Pivoting Arm Unwind Stand with in-floor track and trolley system. Air-cooled pneumatically controlled brakes on each arm. Optional ltalian RE Brake.	Manual de-curler adjusted by hand wheel. Optional motor driven decurler with remote push button control.	Delivery table able to take 1500 mm high pile, complete with automatic lowering from a pre-set pile height sensor. Optional Delivery Top Belt to assist operation for light weight paper.


Exit Roller to the Layboy with Air Jets to supply a curtain of air onto the underside of the sheets and assist delivery of the sheet into the pile.	Fully synchronized speed between high speed outfeed and overlap tape section to maintain a proper shingle.	Twin Motor Drive System. Feeder Roll and Knife Roll driven by separate AC Servo Motor systems.	EPC Pneumatic Sensor coupled with an independent "Swing Frame" allows for minimum edge trim of the web, and strict control of the web edge throughout the reel from start to finish.


Pneumatic Slitters ensure the stable and clean slitting. Optional TIDLAND CLASS for heavier boards.	High Speed Outfeed Tape Section to accelerate the sheets away from the knives. Optional Manual Reject Gate System.	HMI Touch Screen operator console integral to knife with order entry and diagnostics.	Auto Tension Control with Swing Arm Dancer Roller, gives constant full tension control from the start to the end of the reel.

GMC-TC

GMC-TC

Max. Web Width	1600 ㎜ Trimmed	63"' ㎜ Trimmed
Min. Web Width	400 ㎜	15.7"
Max. Roll Diameter	1800 ㎜	70.8"
Min. Roll Diameter	400 ㎜	15.7
Core Roll Diameter	76.2 ㎜, 152.4㎜, 304.8㎜	3", 6", 12"
Cut-off Length Range	460㎜ -1370㎜	18" - 54"
Max. Pile Height (including pallet)	1500 ㎜	59"
Max. Pile Weight	2000 kgs	4,400 lbs
Max. Mechanical Speed	3000 MPM	980 FPM
Designed Knife Loading (max.)	1000 gsm	1000 gsm
Sheet Length Accuracy (single web)	± 0.5 ㎜ up to 1000 ㎜ ± 0.05% over 1000 ㎜	± 0.02"
Sheet length Squareness (single web)	± 0.5 ㎜ as measured for 1000㎜ wide sheet.	± 0.02"
Main Power	3 Phase, 380V, 50/60 HZ
Total Power Consumption Required	45 KW
Machine Total Weight	19800 kgs (1 roll stand) 28000 kgs (2 roll stand)	43650 kgs (1 roll stand) 61730 kgs (2 roll stand)
Machine Dimension (L x W x H)	15.5 x 5.8 x 2.85 M (1 roll stand) 21.7 x 5.8 x 2.85 M (2 roll stand)	51' x 19' x 10' (1 roll stand) 71' x 19' x 10' (2 roll stand)

＊Specifications may change without notice.

Download the brochure

pdf
Download the PDF (None)

Links

New Equipment

Single Rotary Sheeter

Dual Rotary Sheeter

Datien Guillotine Cutter

Goodstrong Rollstands

JME Core Splitter

JME Lineal Dancer

Used & Refurbished Equipment
Used Equipment

View Our Inventory

Refurbished Equipment

Parts

Martin Rollstands Parts

GoodStrong Sheeters Parts

Marquip Splicer Parts

Sheeter Accessories

Replacement Blades

Service and Support

Service, Install & Consulting

Upgrades & Accessories

Technical Articles

Contact information

Got a question? Want a quote? Send us an email

JM Equipment, Inc.
405 1/2 West Congress St.
P.O. Box 7183
Sturgis, MI 49091
Phone: (269) 659-0093
Fax: (269) 659-8694