New Equipment
Single Rotary Sheeter
Dual Rotary Sheeter
Datien Guillotine Cutter
RollRite Rollstands
Automatic and Nonstop Splicer
JME Core Splitter
JME Decurler
JME Linear Dancer

Used and
Refurbished Equipment

Used Equipment
Miscellaneous Inventory

View All Parts
Martin Rollstand Parts
Goodstrong Sheeter Parts
Replacement Blades

Service and Support
Service, Install & Consulting

Upgrades & Accessories

Technical Articles and Testimonials

JM Equipment, Inc.
405 1/2 West Congress St.
P.O. Box 7183
Sturgis, MI 49091
Phone: (269) 659-0093
Fax: (269) 659-8694



Goodstrong Sheeter (dual rotary)
GMC-TC II 1600



• Two motor drives synchronous cutting

• Heavy Duty cutting section with auto sheet length and squareness

• 2 positions Shaftless Unwind Stand

• Auto Tension Control

• Auto Edge Guidance

• Decurler Device

• 3 Station Slitting

• Trim Removal System

• Dust Extraction

• Overlapping Tape Section

• Layboy to accept pile height of 1200mm

• Counter and Tab Inserters

GMC TC1600 Shaftless Unwind Stand:

• Each shaftless unwind stand has its own control station, thus allowing positioning laterally, and vertically for loading and unloading the reels.

• The dancer roller is designed with Auto Tension Control for measuring the tension.

• Auto Edge Guidance is supplied as standard, allowing minimum edge trim for web width and is controlled throughout the reels from start to completion.

• Decurler devices complete with one square bar and one round bar, alternative to the paper or board and could be adjusted through the hand wheel.

Twin Helical Knives:

• The specially designed Twin Rotary Knives are driven by the AC Servo motor, provides excellent sheet to sheet accuracy +/- 0.5mm, and high performance synchronized control system gives less force, more durable and guarantees longer knife life.

• Synchronous cutting by Twin Helical Knives ensures squareness, clean cut and dust free edges, can work efficiently with the Printers, and simplifies the processing procedure.

• The squareness is controlled automatically.

Men/Machine Interface:

• Length of cut value is entered by a touch screen interface for quick and easy size changing.

• Length of cut, quantity, machine speed, cut speed are displayed on the screen.

Tab Inserter Setting:

• Counter and Tab Inserters supplied that will automatically insert tabs at the required ream count.


• Layboy to accept pile height of 1200mm including pallet.

• There are side-joggers on both left and right sides of the stand and a front jogger, controlled by a vibration motor to collect the paper evenly and trimly.

• Safety devices on three sides of the lifting table, whenever there's impurity entering into the bottom of the lifting table during the operation, the lifting table will stop running immediately.

Overlapping Station:

• Check Roller Positioning at the overlapping station is via a manually operated hand wheel, which the operator can set to suit the sheet length being cut.

Advanced Design Concept:


  The advanced design of the twin helical knife cylinders, which are directly driven by a brushless AC Servo Motor.
  Touch Screen operator console integral to knife with order entry and diagnostics.
  Dual position shaftless pivoting arm unwind stand with in-floor track and trolley system. RE aircooled pneumatically controlled brakes on each arm.
  High speed outfeed tape section with Reject Gate.
  The GMC swing arm dancer roller with Auto Tension Control
  Motor driven decurlers with remote push button control for each De-Curler Device.
  Fully synchronized speed between high speed outfeed and overlap tape section to maintain a proper shingle.
  Belted Non-stop grid system for continuous skid delivery.
  The heavy duty Pneumatic Slitters ensure the stable and clean slitting.
  Exit Roller to the Layboy with Air Jets to supply a curtain of air onto the underside of the sheets and assist delivery of the sheet into the pile.
  Web guide system provides positive web edge position control.



Reel Width Trimmed: 400 mm-1,600 mm (16” -63”)
Reel Diameter: Ø300 mm-2,100 mm (Ø12” -82”)
Reel Max. Weight (Per Reel): 3,200 Kg (7,000 Lbs)
Standard Tapered Chucks: 76 mm -305 mm (3” -12”)
Speed Curve: Up to 300 M/Min (990 ft/Min)
Knife Loading: 1,000 gsm (200 Lbs/1,000 sq.ft)
Cut-Off Range: 460 mm -1,778 mm (18” -70”)
Material Applied: Fine Paper to Paperboard, coated or uncoated. Single or Multiple Webs.
Max. Pile Height Clearance: 1,650 mm (65”)
Max. Pile Weight: 2,500 Kg (5,500 Lbs)
Total Electrical Power: 3-Phase, 380V/480V, 55 KW, 50Hz/60Hz

Specifications may change without notice.


  Download Product Brochure